Removing Residue from the Scentsy Dish

Whenever you change the wax in your warmer, you should wipe the dish with a paper towel until it is smooth, shiny, and like new. Doing so will ensure that the next time you need to remove the wax it will release easily. But what do you do when there is a residue left in the warmer dish that you cannot wipe out?

Plugin warmer with residue in the dish

This has only happened to me a couple of times, and it is a concern because it makes it more difficult for me to remove subsequent wax from the warmer--especially if it is a plugin warmer that I use a Grab Tab to remove the wax.

The remedy for this problem is simple enough. Remove the cooled piece (i.e., the warmer dish or the plugin top) and hand wash it with dish soap. I use a non-scratch scouring sponge to scrub the residue away. When you are finished, be sure to let the piece dry before placing it back on your warmer.

Good as new!

Scent Circles

One of my favorite Scentsy products is the Scent Circle. I have to admit, though, that the first time I used a Scent Circle I was less than impressed. I took the Scent Circle out of the wrapper and hung it in my office. For the first few days, the scent was STRONG--almost too strong. Then the scent gradually faded. I thought to myself, "Even though the Scent Circle only costs $3, the amount of time that it fragranced my office was not worth it."

After reading the directions on the back of the Scent Circle package, I realized that I hadn't used the Scent Circle properly. By following the directions (i.e., Pull the string out and hang freely. Adjust scent strength by exposing more of the Scent Circle.), I was able to get my money's worth and then some! But still, I didn't like how the Scent Circle looked hanging in it's package. After some research, I found an easier and prettier way to leave the wrapper on the Scent Circle in order to maximize fragrance endurance. For my customers' convenience, I print the expanded directions on a label that I affix to the back of the Scent Circle package. Below are the directions and pictures to help you visualize the process.

Maximizing Your Scent Circle

1. Cut plastic wrapper above Scent Circle.

2. Take Scent Circle out of wrapper. Cut approximately 1/2" off open end. Cut a small triangle out of sealed end to allow string to go through.

3. Hang in desired location.



4. When scent becomes weak, take Scent Circle out of wrapper and cut another 1/2" off.

Scent Circles are available in all 80 scents PLUS LEATHER.

Ready for a Refill?

Remember when you first got your Scentsy warmer? You popped out a cube or two of wax, placed it into the warmer's dish, and turned on the switch. Twenty minutes later you enjoyed that wonderful scent. Do you still enjoy your scent? Does it still fill your room? If not, you need to replace your wax.

How to Remove the Wax in Your Warmer

There are 3 different ways you can remove the wax from your full or mid-sized warmer.

• Pour the melted wax into the trash can or back into its clamshell container. Wipe out the warmer dish with a paper towel, making sure that there are not any drips remaining on the sides and underneath of the dish. (This is my prefered method).

OR

• When the wax is cooled and hardened, place the warmer dish in the freezer for 5 minutes. The wax should shrink and easily flip out of the dish. Wipe out the warmer dish with a paper towel.

OR

• After the wax is melted, turn the warmer off. When the wax begins to solidify and is the texture of putty, use a rubber or silicone spatula to scrape the wax out. Wipe out the warmer dish with a paper towel.

If there is a bit of wax residue left in the warmer's dish, you can hand wash the dish with mild dishsoap and a non-scratch sponge. Be sure that the dish is completely dry before placing it back onto the warmer's base.

How to Order More Wax

Each Scentsy bar should last 60-80 hours. Unlike a traditional candle, the Scentsy wax will not evaporate--but the scent will. I have different options available for you to order more wax.

• Call, text, or email me. I order at least once a month, and I can save you shipping if I am placing another order anyway. Plus, I might even have the Scentsy bar in stock--so that means you could "cash and carry" that very day.

OR

• Order from my Scentsy store website. If you order through the website, you will have to pay minimal shipping fees.

OR

• Let me know how often you want to be contacted, and I will check with you whenever I am about to place an order.

OR

• Host a party. By hosting a party, you could get your Scentsy free and discounted!

Flossing is Good for Your Teeth--and Your Scentsy Plug-in Warmer!

Many people purchase the Scentsy plug-in because of it's versatility. It is perfect for a small room such as a bathroom. However, whenever the scent is depleted from the wax, it can be tricky to remove the wax from the plug-in without spilling it everywhere.


Because of this, Scentsy is introducing a plastic Grab Tab that you put into the wax basin to assist you in removing the hardened wax. The cost of these Grab Tabs is minimal--$3 for a 25 pack. These Grab Tabs will be available March 1, 2011.

However, I have found a less expensive option (not that $3 is a lot) that is just as effective. All you need is dental floss, which if you keep a plug-in in your bathroom the floss should already be handy.

How to Use Dental Floss
to Remove Scent-Depleted Wax From Your Plug-in

1. Melt the wax in your warmer

2. Take a piece of floss about 5-6 inches long and wrap it around your finger in order to form a coiled piece

3. Place the coiled piece of floss into the melted wax, leaving a small section of the floss extending out of the wax 

4. Turn the plug-in off and let the wax harden

5. When the wax has completed hardened, pull the floss that is extended out of the wax until the wax disc pops out

How does Scentsy work?

Tips

• Use 2-3 wax cubes for the full size warmers
• Use 2 wax cubes for the mid-size warmers
• Use 1 wax cube for the plug-in warmers
• The wax will not evaporate; dispose of the wax when it has lost its smell
• To change scents, melt the wax, pour the wax back into its original container, wipe out the warmer bowl, and place your new wax cubes into the bowl